Schedule Your Service Today!




Water Heater Maintenance: How to Maintain your Water Heater

Water Heater Maintenance: How to Maintain your Water Heater

Every homeowner desires to have a significant and long-lasting water heater. If properly maintained, they can be used for 12 to 15 years. The routine maintenance can be done yearly and worn parts replaced. Besides, when installing a water heater, always go for high quality with adjustable temperature knobs. With warm water, you will kill germs, wash dishes, clothes, and bath at your convenience.

Benefits of Routine Water Heater Maintenance

  • Durability: well-serviced heaters last longer.
  • Convenience: There is no worry of operation disruption at any time except when there is a power blackout without back up.

Tips on How to Maintain the Water Heater Effectively

Conduct a Yearly Flush – A lot of sediments accumulate at the bottom of the tank. However, they don’t interfere with the working of the heater but reduces its effectiveness. Ensure you switch off the power supply to the heater and turn off the horse pipe water supply and drain the water out of your heater.

Again, clean the bottom of the tank and remove any deposits and sediments. However, before this is done, allow water in the tank to cool. When the cleaning is complete, fill the tank back and turn on your heater to continue working usually. This flush should be done yearly to reduce sediment accumulation in the tank.

Procure Expert Inspection
Experts know what must be in shape for optimum operation of the heater. A professional inspection will aid in the identification of the worn-out parts and what should be fixed. Don’t wait until the heating system starts to show signs of ineffectiveness.

Since the heater is operated using electricity, it is critical to know the type of heater you are using and the expert specialist that inspect it. The inspection will ensure spares are fixed in time, and your daily life is not interrupted in any way. As a consumer and homeowner, have basic knowledge about heaters so that you can inspect the heaters on your own before professional services are sought.

Regular Check on T&P Valve
One of the significant features of the water heater is the temperature and pressure valve. This valve is made in a way that it can self-regulate and automatically sense high pressure. Interestingly, when the pressure is high, the valve will open and release excess pressure to prevent an explosion.

On the other hand, the T&P valve also helps in temperature regulation. Most water heater manufacturing companies recommend annual T & P valve be conducted because its failure is detrimental to the home owner’s safety.

If you want to carry out a valve check, follow this procedure:

Step #1. Have a pail at the end of the delivery tube connected to the pressure and temperature valve.
Step #2. Carefully lift the lever of the valve so that hot water can be discharged to the pail. Take precautions to ensure the hot water does not come into contact with the skin.
Step #3. Allow water to come for a few minutes, then manually snap back the lever to its place. To prevent water from coming out.

Should water continue to come out after the valve is fixed back to its original place or leaks, a new valve should be fixed. Valve check is a critical maintenance practice that you should not ignore.

Regulate the Temperature Downwards
Water heaters can contribute to the chunk amount of your monthly electricity consumption. It is essential to ensure you preset the temperature to between 130 to 140 degrees Fahrenheit. The U.S Department of Energy recommends that water heaters be set at 120 degrees Fahrenheit to reduce domestic electricity consumption by five percent.

Lowering the temperature will reduce the number of mineral deposits in your water tank and further prevent scalding. Sometimes to achieve this low temperature, you may be required to remove the metal casing covering the thermostat.

Here is the procedure for lowering the temperature:

Step #1. Turn off the power supply from the consumer box or circuit breaker box.
Step #2. Using a flathead screwdriver, remove the thermostat access panel and adjust the temperature to the desired degree.
Step #3. Finally, replace the thermostat and put on power.
Always ensure your water heater temperature is regulated appropriately. The extreme temperature may lead to an explosion.

Therefore, it is vital to ensure your water heater is properly maintained to serve you well, effectively, and for a long time. Water heater maintenance should be conducted annually, and a professional inspection helps to identify parts to replace.

Additionally, flushing out the tank yearly to remove the sediments and mineral deposits improves the water heater’s effectiveness. The pressure and temperature valve is an essential component of the heater, which should be maintained.

If you are looking for professional water heater services, don’t look any further; we got you covered. Visit E Dennis today and sign up.

Americans with Disabilities Act (ADA) Notice

At E Dennis, we are committed to ensuring that individuals with disabilities enjoy full access to our websites. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (770) 758-0501; or email us at and place “Web Content Accessibility (ADA)” in the subject heading and we will make all reasonable efforts to assist you.